Выпуск
1971 Marshall Plexi Cooks Grilled Cheese Sandwich | AI Design
AILardTalk · 6 ноября 2026 г. · 13 мин
I'm turning a 1971 100-watt Marshall Plexi into a grilled cheese press by running its speaker output into a cooking surface instead of a speaker cab. The problem: a stove burner puts out about 1,000 W and the Plexi makes about 100 W on a good day. If the load ever opens, the amp's 50-year-old output transformer is toast. The first design used three 300 W aluminum-clad resistors on an insulated aluminum plate, for about $270 and 10 to 15 hours of work. Then Claude found a better load: a thrift-store 1500 W griddle. Its nichrome element measures about 9.5 ohms, close enough to the 8-ohm tap, and it's already built to run hot and bonded to a cooking surface. The plan is to pull the thermostat and pilot light so the load never opens, add a speaker jack with a 100-ohm backup resistor across it, and clip on a thermocouple to watch plate temperature. A resistor divider and op-amp line out feed an impulse response so you still hear the guitar. With 100+ W going into an insulated plate, that's about 10 minutes per sandwich. Total is around $50 and 3 to 5 hours, tested on a cheap tube amp first. Should I build it? Comment BUILD IT if you want to see the real thing. I'm not building it without comments. The real builds: https://lardrocket.com The AI in this video is Claude by Anthropic. Her voice (ElevenLabs) and the avatar (HeyGen) are AI-generated. The engineering conversation is real and unscripted.