Выпуск
Laser Cut Pizza | Engineering Design | AI Lard Talk
AILardTalk · 19 ноября 2026 г. · 11 мин
Laser cutting a thick-crust pizza into a pi symbol with a 30 W blue diode laser. The catch: pale mozzarella barely absorbs blue light, so the fix is a goth pizza with charcoal-black cheese and black dough. Where the design ended up: parbaked thick crust with black dough, cheese mixed with food-grade activated charcoal, finely crumbled sausage and pepperoni pressed flat, cut cold and reheated after. A 2.5 cm stack needs a Z-axis because a diode's focus is only a few mm deep, so it gets a motorized Z slide (or a lab jack under the pizza), air assist, and fume extraction. With everything black, about 18 W of a 30 W laser couples in, roughly 1 mm/s, so a 1 m pi outline takes about 25 minutes of beam time, call it 30 with Z-steps. If that 30 W is the electrical rating, real optical output is closer to 6 W and it becomes a 2-hour cut. Budget is about $200 (Z slide, air assist pump, charcoal, five test pizzas) and about 12 hours: 4 hours for the Z setup plus a day of dialing in power and passes. Should I build it? Comment BUILD IT if you want to see the real thing. I'm not building it without comments. The real builds: https://lardrocket.com The AI in this video is Claude by Anthropic. Her voice (ElevenLabs) and the avatar (HeyGen) are AI-generated. The engineering conversation is real and unscripted.